| Capacity | 100 m³/hr |
|---|---|
| Pressure | 36 Bar |
| Temperature | 200°C |
| Viscosity | 1,00,000 cSt |
Description:
HPF series single screw pumps are designed specially for hygienic application. All metallic parts in contact with the fluid are in smooth finish stainless steel, and stator is of non – contaminating food – grade elastomer viz. Nitrile, EPDM, Silicon and Viton. Shaft sealing is ensured by hygienic quality gland packing or mechanical seal. These pumps are available in IDF / SMS or equivalent suction and discharge connection.
Salient Features:
WETTABLE PARTS:
(PUMP HSG / END COVER / ST.BOX / GLAND)
ROTOR (UP):
STATOR (RUBBER):
SHAFT:
SEALING OPTIONS:
FLANGE STANDARD:
Dry Running Protection Device:
To prevent the stator damage due to dry running, specially developed temperature sensor is screwed into the stator wall to monitor the operating temperature. Due to any reason if the pump runs dry, the stator temperature will increase. DRP would switch off the pump at preset temperature.
Relief Valves:
In addition to relieving excess pressure from closed-top vessels or piping systems, these normally closed valves provide system control benefits. It is versatile and widely utilized valve. Its compact size, ease of setting, readjustment and repeatability, all contribute to its popularity. The pressure setting is done manually.
